The best primer for interior walls and ceilings that provides you with excellent coverage as well as a better finish. Also suitable for newly built houses.
What's in it for you
- Increases adhesion with subsequent coats
- Prevents colour and gloss differences in the finish
- Can be applied over contaminants such as soot
- Very suitable for newly built houses
- Excellent coverage, in some cases only 1 finishing coat needed
Sigma Sigmacryl Prim Opaque - Primer
Absorption-neutralizing opaque water-based primer for interior walls based on an acrylate dispersion technology.
Description
Key Features
- High coverage
- Neutralises the absorption (differences) of the surface, prevents gloss fur (dull and shiny spots) in the finish
- Increases the open time of the finishing coat, so that the chance of start-up decreases
- Very good flow, promotes a high-quality, smooth finish
- Application by brush, roller or sprayer
- Can be overpainted after 4 hours
- Coverage: approx. 9 - 11 m² /litre
Ordered before 4 pm, shipped the same working day
Which shipping methods can you choose from?
- Service Point Delivery: An environmentally friendly alternative if you pick up your package(s) by bike or walking, or simply handy when you can't be at home.
✅ free for orders above € 75; otherwise € 4,95 - Home Delivery: have your products delivered at home or at any address you choose, by Bpost or PostNL.
✅ free for orders above € 75; otherwise € 6,95 - Collect in store in our service point in Stekene is also possible.
✅ always free
Can I return this product?
Application method: | Airless, Paint brush, Paint roller |
---|---|
Coverage: | 9-11 m²/l |
Gloss level: | Velvet |
Opacity: | Opaque |
Purpose: | Ceiling, Walls |
Base: | Water-based |
Interior / exterior: | Interior |
Substrate: | Brick, Concrete, Intact paint layer, Plasterboard, Stucco, Wallpaper |
Area: | Bathroom, Bedroom, Child's room, Hallway, Kitchen, Living room |
Characteristics: | 1-component, Low odour, Quick drying |
Product type: | Primer |
How do you use Sigmacryl Prim Opaque?
Make sure the walls and ceilings are properly prepared. By this we mean that the wall must be dry, degreased and dusted. This will allow the primer to adhere better and ensure a good result.
Then you can start with 1 layer of Sigmacryl Prim Opaque. If you already have it mixed in the finishing colour, 1 finishing coat of Sigma Perfect Matt may be sufficient. If you still feel the paint does not cover sufficiently, you can still apply an additional finishing coat of Sigma Perfect Matt.
Are you going for white? Then we recommend two finishing coats in the desired colour.
How much Sigma Sigmacryl Prim Opaque do you need?
Size | Surface in 1 layer |
---|---|
1 litre, white or light colours | ± 10 m² |
2,5 litres, white or colour | ± 25 m² |
5 litres, white or colour | ± 50 m² |
10 litres, white or colour | ± 100 m² |
What colours are available in this Sigma primer?
You can of course get this primer in the standard white colour. You cannot compare this with a RAL colour, because this is the basic colour of the paint. If you had to make a comparison anyway, we could say that a white sheet of paper would be the closest. If you want to order Sigma Prim Opaque 10l in the white colour, you will enjoy a discount price.
Also know that you can request this Sigma primer in a colour from a RAL range, NCS range, Sigma colour chart and even colour charts from other brands such as Sikkens or Levis. This has the advantage that you can immediately take the colour of your finish and thus, firstly, already see if you like the colour in the room and, secondly, this often ensures that you only need one finish coat instead of two.
Popular mixing colours for Sigmacryl Prim Opaque
Would you like to be able to see your finishing colour on your wall or ceiling right away? Then you can already have the primer mixed in your favourite colour. Not sure which colour you want yet? Get colour inspiration from our blogs.
Or take a look at these popular colours often chosen for walls and ceilings.👇