An opaque water-based coloured wood protection, specially developed for windows and doors. Can be used both indoors and outdoors.
What's in it for you
- Resists heavy rain and UV rays
- Moisture does not penetrate the wood
- Colours the wood, but leaves wood structure visible
- Allows the wood to breathe
- 3 to 5 years of excellent colour retention
Xyladecor Ramen en Deuren Dekkende Beits - Coloured Wood Stain
Description
Want to offer your wood an opaque colour, but still leave the wood structure visible? Then get started with this opaque wood stain from Xyladecor. The stain has been specially developed for wooden windows and doors, but wooden garage doors or window shutters can also be perfectly stained with it.
The product will provide your surface with a silk-gloss finish and will protect against UV rays and rain. If you apply this stain every 3 to 5 years, it will prevent your wood from greying or rotting.
Just keep in mind if you prefer a darker shade, you won't be able to fade your wood tone later. Either go for dark and stick with that dark colour, or choose a light colour and you can always darken later.
Key features
- Colours the wood
- The wood structure remains visible
- Water-repellent
- No dilution needed
- With 0.75l you do circa 9m²
Ordered before 4 pm, shipped the same working day
Which shipping methods can you choose from?
- Service Point Delivery: An environmentally friendly alternative if you pick up your package(s) by bike or walking, or simply handy when you can't be at home.
✅ free for orders above € 75; otherwise € 4,95 - Home Delivery: have your products delivered at home or at any address you choose, by Bpost or PostNL.
✅ free for orders above € 75; otherwise € 6,95 - Collect in store in our service point in Stekene is also possible.
✅ always free
Can I return this product?
Application method: | Paint brush, Paint roller |
---|---|
Coverage: | 12 m²/l |
Gloss level: | Satin |
Opacity: | Opaque |
Purpose: | Doors, Garage door, Shutters, Window |
Base: | Water-based |
Interior / exterior: | Exterior |
Substrate: | Wood |
Area: | House exterior |
Characteristics: | 1-component, Water vapor permeable, Weatherproof |
Product type: | Single paint system, Wood stain |
How do I apply this Xyladecor opaque stain to my windows and doors?
Preparation: Use tape and a covering sheet to protect your surface, also outside so that your grass or terrace remain protected from paint splashes. Then lightly sand the wood with sandpaper (P180) in the direction of the wood grain. After sanding, remove dust with a soft brush such as Progold's half-moon brush. Staining can almost begin, but first degrease your surface with Berdy Clearline.
Application: Do you have new, untreated wood? Apply 1 coat of Xyladecor Primer Clear Extra BP with a brush. Already treated or stained wood that is still in good condition? Then you can start with Xyladecor Ramen en Deuren Dekkende Beits. You apply 2 to 3 coats in total, respecting the drying times. This allows you to apply the next coat with a paint brush after 8 hours of drying.
Remove the masking tape and clean your painting material with water.
>> Do you prefer a detailed step-by-step guide that tells you what to do with wood rot, greying wood or flaking paint? Then check out the step-by-step plans below that go into even more detail on how to stain your wooden windows and doors. 👇
What colours exist in Xyladecor opaque stain?
This Xyladecor stain is available in three colours. So you have a white-grey chalk colour, a soft brown sand shade and a grey stone colour. These colours will cover your wood but keep the wood structure visible. So the best of both worlds!
Would you prefer a different shade? Then you can specify just about any colour code in a similar product Xyladecor Dekkende Beits TQ. You can certainly use it on wooden gates, doors and windows.