Sikkens Alphacryl Perlino
From
€32.95
Free shipping for orders over € 75
Pay later with
Secure delivery at home or at a pickup point
Pay online with eco-vouchers
This velvety matt wall paint is hugely suitable for bathrooms and kitchens as the paint is water- and grease-resistant.
What's in it for you
- Excellent washability without glazing
- Can be used as primer and finish
- Conceals previous stains from nicotine or soot
- The paint is grease- and water-resistant
- Risk of splashing reduced by binder
Sikkens Alphacryl Perlino - Bathroom Wall Paint
Washable velvety insulating wall paint based on a water-dilutable 100% acrylic dispersion for indoor use.
Description
Sikkens Alphacryl Perlino is suitable for treating plaster, concrete, primed surfaces and fiberglass cladding. This paint is ideal for use in sanitary areas, bathrooms,… and can also be used in areas where food is prepared, treated and processed.
Key features
- Highly aesthetic finish due to its velvety satin finish
- Does not splash and can be applied without starting
- Washable, does not shine
- Isolates stains from e.g. nicotine, ink, ...
- Easy to process
- Fast drying
- Tension arm
- Can act as a one-pot system
- Hydrophobic and lipophobic, excellent stain resistance
Ordered before 4 pm, shipped the same working day
Which shipping methods can you choose from?
- Service Point Delivery: An environmentally friendly alternative if you pick up your package(s) by bike or walking, or simply handy when you can't be at home.
✅ free for orders above € 75; otherwise € 4,95 - Home Delivery: have your products delivered at home or at any address you choose, by Bpost or PostNL.
✅ free for orders above € 75; otherwise € 6,95 - Collect in store in our service point in Stekene is also possible.
✅ always free
Can I return this product?
| Application method: | Airless, Paint brush, Paint roller |
|---|---|
| Certification: | EU Ecolabel, HACCP food industry |
| Coverage: | 9-11 m²/l |
| Gloss level: | Velvet |
| Opacity: | Opaque |
| Purpose: | Ceiling, Walls |
| Base: | Water-based |
| Interior / exterior: | Interior |
| Substrate: | Concrete, Fibreglass, Intact paint layer, Plasterboard, Stucco, Wallpaper |
| Area: | Basement, Bathroom, Bedroom, Child's room, Garage, Hallway, Kitchen, Living room |
| Characteristics: | 1-component, Eco-friendly, Excellent cleanability, Quick drying, Stain insulating, Stays matt, Water vapor permeable |
| Product type: | Single paint system, Topcoat |
How to apply Sikkens Alphacryl Perlino
Preparation: Protect any surfaces that shouldn’t be painted using masking film and masking paper, and painter’s tape. If you’re working on freshly painted walls or planning to apply multiple coats over a few days, purple 3M masking tape is the best option, as it can be removed easily without damaging the surface.
Application: Sikkens Alphacryl Perlino can be used both as a primer and a finishing coat. On non-absorbent surfaces, you can apply two to three layers directly. Unsure if your wall is absorbent? Simply spray a little water on it. If it soaks in immediately, your surface is absorbent and requires an additional primer. For the best results, we recommend using Sikkens Alphacryl Primer as a base coat.
Experience the beautifully velvety finish that stays effortlessly fresh. Thanks to its washable properties, keeping your walls clean has never been easier. Now that’s a bonus worth celebrating!
How to guides
How much Alphacryl Perlino do you need?
Not sure whether to choose a 10-litre bucket or a combination of 5, 2.5, and 1 litre? This handy table below gives you an overview of the approximate coverage per pack size.
| Size | Surface in 1 layer | Surface in 2 layers |
|---|---|---|
| 1 litres, white or mix colour | ± 10 m² | ± 5 m² |
| 2,5 litres, white or mix colour | ± 25 m² | ± 12,5 m² |
| 5 litres, white or mix colour | ± 50 m² | ± 25 m² |
| 10 litres, white or mix colour | ± 100 m² | ± 50 m² |
On average, 1 litre of Alphacryl Perlino covers around 9 to 11 m² with a single coat. To simplify calculations, we estimate a coverage of 10 m² per litre. This means:
- 1 litre covers approximately 10 m² with one coat, or 5 m² with two coats.
- 10 litres covers approximately 100 m² with one coat, or 50 m² with two coats.
- The more coats you apply, the smaller the coverage per litre.
Keep in mind that these are approximate figures, as paint consumption depends on factors like surface absorbency and your painting technique. If the wall absorbs a lot of paint or if you apply thick layers, you may need more than expected.
To avoid waste, it’s often better to order slightly less and top up later if needed.
Which Colours Are Available in Sikkens Alphacryl Perlino?
Good news! This Sikkens bathroom paint can be mixed in almost any colour you like. You can choose from the extensive 5051 Colour Concept range, opt for an NCS or RAL shade, or even pick a colour from another well-known collection, such as Levis or Sigma.
Below are some of the most popular choices:
- Sikkens Alphacryl Perlino RAL 9010 – A timeless off-white shade that remains a bestseller and suits any interior.
- Sikkens Alphacryl Perlino RAL 9016 – A crisper, cooler white for a brighter and fresher look.
- Early Dew 3031 – A greyish shade of green that is very popular for accent walls.
Looking for something even more on-trend? Then be sure to check out our blog with the trend colours for 2025, where you’ll find the latest must-have shades to elevate your space.
Need help picking the perfect colour? Feel free to contact us. we’re happy to assist!
Free shipping for orders over € 75
Ordered before 4 PM, processed the same working day*
98% of customers give us a 4-5 star rating
Free shipping for orders over € 75
Ordered before 4 PM, processed the same working day*
98% of customers give us a 4-5 star rating